How to Download and Use Universal Dreamup V2009 Patched By Forhike And Natas
Universal Dreamup is a software tool that allows you to flash your Dreambox satellite receiver with custom firmware. It can also repair your Dreambox if it is bricked or stuck in a boot loop. However, the original version of Universal Dreamup has some limitations and bugs that prevent it from working with some models and versions of Dreambox.
Fortunately, there is a patched version of Universal Dreamup V2009 that was created by two hackers named Forhike and Natas. This patched version can bypass the bootloader check and flash any Dreambox model with any firmware version. It also has some additional features and improvements that make it more user-friendly and reliable.
In this article, we will show you how to download and use Universal Dreamup V2009 patched by Forhike and Natas to flash your Dreambox with the firmware of your choice.
Step 1: Download Universal Dreamup V2009 Patched By Forhike And Natas
The first step is to download the patched version of Universal Dreamup V2009 from the link below. This is a zip file that contains the executable file and a readme file with instructions and credits.
Download Universal Dreamup V2009 Patched By Forhike And Natas
After downloading the zip file, extract it to a folder on your computer. You will see a file named universal_dreamup_v2009_patched_by_forhike_and_natas.exe. This is the file you need to run to flash your Dreambox.
Step 2: Connect Your Dreambox To Your Computer
The next step is to connect your Dreambox to your computer using a null modem cable. A null modem cable is a special type of serial cable that allows two devices to communicate directly without a modem. You can buy one online or from an electronics store.
Plug one end of the null modem cable into the serial port of your Dreambox and the other end into the serial port of your computer. If your computer does not have a serial port, you can use a USB-to-serial adapter.
Make sure that your Dreambox is turned off before connecting it to your computer.
Step 3: Run Universal Dreamup V2009 Patched By Forhike And Natas
The final step is to run the patched version of Universal Dreamup V2009 that you downloaded in step 1. Double-click on the universal_dreamup_v2009_patched_by_forhike_and_natas.exe file to launch it.
You will see a window like this:
Select the COM port that corresponds to the serial port where you connected your Dreambox. If you are using a USB-to-serial adapter, you may need to check the device manager to find out which COM port it is using.
Click on the Connect button to establish a connection with your Dreambox. You will see a message like this:
Now, turn on your Dreambox by plugging in the power cord. You will see another message like this:
This means that Universal Dreamup has detected your Dreambox and is ready to flash it. Click on the Flash button to proceed.
You will be asked to select the firmware file that you want to flash onto your Dreambox. Browse to the folder where you have downloaded or saved the firmware file and select it. The firmware file should have an extension of .nfi or .img.